Comprising a selection of variations on the popular Shaker Design. These doors are available in a wide selection of flat, single colours and also popular wood effects. There is technically no difference between these designs and the Shannon & Downland Vinyl door Ranges but due to the complexity and consequent increased time to make these designs attract a price premium and fall into a higher price range. Wardrobe size doors are available as are glazed or mirrored panel options for most styles. An alternative option is to supply rebated open frames for you to glaze. Grain may run vertically or horizontally just specify when ordering.

These replacement doors are made using 18mm thick medium density fibreboard (MDF) with a laminated melamine back in colours which match the vinyl face. Computer controlled routing machines are used to accurately cut a wide selection of edge and face patterns into the raw MDF. The vinyl foil is then stuck to the face and four edges by means of a press. Only the highest quality moisture resistant board and heavy guage vinyl foil are used so as to ensure years of troublr free service. The Minimum height or width is 100mm, the Maximum height is 2400mm, Maximum width is 1000mm. It is not possible to reproduce some designs on narrow doors (less than 200mm) in these cases a flat face with edge routs only will be applied.

All of the doors in all of our ranges are completely made to measure and we will quote for any size which is specified (within the size limits for that range - see above). It is worth noting however that in order for doors and drawers to open without rubbing against an adjacent item then door and drawer front widths are usually a few mm less than the cabinet width. A typical door or drawer front for a 500mm wide cabinet would be 496mm wide. At the stage where you are providing sizes for us to quote please do not be too concerned about this aspect. Once you have placed your order we have a tried and tested system for ensuring these sorts of details are specified correctly. Similarly with hinge holes, for quotation we only need to know whether the door is to be drilled or not, we will request details for positions when you have placed the order.

See Vinyl Wrapped Bedroom Doors